Superlease Blue peel ply is a high temperature fabric coated with a silicone release agent. It provides superior release to plain peel plies because the coating prevents the fabric from bonding to the laminate while producing a textured surface.

Econostitch® G is an economical, heat set and scoured peel ply with good performance when used with both polyester and epoxy resins.

Stretchlon® 200 is a high elongation vacuum bagging film.

Airtech manufactures a variety of quality of vac valves

Toolguard is a high temperature, extruded silicone that provides protection to the mold and the operator during transportation and handling. Toolguard can be permanently bonded to the mold edge using RTV silicone adhesive.

Dahlar® Release Bag 125 (0.001 inch) is the ideal release film for polyester or vinylester resins as well as epoxies and phenolics. Dahlar® Release Bag 125 is also offered with our embossed, cracked ice pattern making it a breather, release film and vacuum bag all-in-one.

Airpad is an uncured non-silicone rubber that can be made into pressure caul sheets and flexible mandrels. The Airpad pressure intensifier provides uniform pressure distribution during autoclave processing.

Durocast Table Tops are manufactured using the highest grade urethane available.  The cutting surfaces always providing a smooth, non-contaminated working surface.

Pressure Strip is used as an expendable item and discarded after each cure. Pressure Strip is applied on top of the release film in the corner of the lay‐up prior to vacuum bagging. Pressure Strip is a compound of butyl rubber, resin plasticizers and fillers. There are no silicones used in the manufacture of this product.

Securlon® L-1000 is a high-temperature, multi-layer extruded vacuum bagging film. Multiple layers reduce the potential for “pinholes”, providing additional security in your vacuum bagging process.